Safety operation rules of chain plate feeder
1. Before turning on
1. Check whether the tension of the chain plate is proper whether there is deflection of uneven stress.
2. Check the wear of the rubber stopper.
3. Check whether there is enough lubricating oil at each lubrication point whether the sealing is good.
4. Check whether the bolts of all parts are tight whether all the parts are intact.
5. After the preparation is completed, notify the control room to start up.
Second, during operation
1. The material stored in the chain plate feeder bin should exceed 10 tons, to prevent the starting torque being too large destroying the machine parts.
2. Check whether any parts are stuck forced mechanical wear at any time during operation. If there is any, stop immediately.
3. Frequently inspect the operating conditions of the coupling, reducer, rear sprocket. The motor temperature does exceed 6 0℃, the bearing temperature must exceed 55-60℃.
4. Supervise the work quality of the loading truck the dry humidity of the raw materials to reflect the situation in time.
乐东黎族自治县ND-2106A laboratory silicate analyzer
乐东黎族自治县SJS-2083 portable desktop Chinese acid-base concentration meter
乐东黎族自治县Industrial acid alkali concentration electrode SD-03B
乐东黎族自治县Industrial residual chlorine electrode (membrane polarographic constant voltage)
乐东黎族自治县DOG-2082 industrial dissolved oxygen meter