High-energy igniter manufacturers remind you of the steps you should ensure when using high-energy igniters

High-energy igniters are commonly used ignition equipment in the fields of power plants, petrochemicals, metallurgy, new energy, building materials manufacturing, etc. They have high efficiency high-quality application effects. However, if there are certain difficulties in actual operation, the application method is correct, they will find abnormalities common failures. Therefore, we must be cautious when applying them. Among them, the stability of the following three links must be guaranteed.

lighter

First, the atomization link. Everyone knows that the fuel will have an atomizing effect when they are applied. At this point, we should pay attention to that if the actual effect of atomization is good, they will affect the ignition effect. Of course, if the operation steps are correct, it may cause abnormal applications. Therefore, it is necessary to pay attention to the reliability of atomization.

Second, the ignition link. When using the Fengxian high-energy igniter to ignite, we must pay attention to the time problem. When the ignition device is turned on, it is more suitable to ignite within 30 seconds. If the time is too long, it is likely to cause some small common faults. Therefore, in order to ensure safety, the timing of ignition should be well controlled.

Third, in the installation process, whether you are using a high-energy igniter independently, an ignition control cabinet, an ignition control box, be sure to connect both sides of the ignition cable before ignition, one end is connected to the high-energy igniter, the other end is connected to the ignition rod. It must be pointed screwed on the external thread, there is an error, which will cause the internal contact of the connector to touch, finally endanger the ignition. Please note that this problem is a general customer feedback problem, you will feel that the product is difficult. After everyone communicates, it is screwed well when connected.

In summary, the application of high-energy igniters must pay attention to the stability of the atomization link its ignition link. If they are all normal applications give full play to the advantages practical effects, the igniter will let us produce More convenient fast application of standards.