JiangsuPHG-2091A Industrial PH Meter

PHG-2091A Industrial PH Meter

●Overview

The pHG-2091A industrial PH meter is one of the 2091 series intelligent online chemical analyzers developed by our company. It has strong environmental adaptability, clear display, simple operation excellent test performance. It has a high cost performance can accurately measure PH value temperature of the solution. It can be widely used for continuous monitoring of PH value in solutions such as thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food tap water.

●Features

● Microcomputerization: High-performance CPU chip, high-precision AD conversion technology SMT chip technology are used to complete multi-parameter measurement, automatic temperature compensation, instrument self-test, high precision good repeatability

● High reliability: single board structure, only one circuit board, no complicated function switch, adjustment knob potentiometer

● Strong anti-interference ability: The current output alarm relay adopt photoelectric coupling isolation technology, which has strong anti-interference ability realizes remote transmission

● Automatic alarm function: The alarm signal is isolated, the upper lower alarm limits can be set arbitrarily, the alarm lag is cancelled

●Technical parameters

Display mode: LED (digital tube) display, high brightness, eye-catching intuitive, long viewing distance

Measuring range: 0～14.00PH, 0～99.9℃, -1999～+1999mV

Temperature compensation range: automatic: 0～99.9℃, manual: 0～99.9℃

25℃ conversion: pure water ammonia-added ultra-pure water conversion at 25℃

Resolution: 0.01PH, 0.1mV, 0.1℃

Accuracy: ±0.05PH, ±1mV, ±0.3℃

Input impedance: ≥1012Ω

Current isolation output: 4～20mA (load <750 Ω)

High low alarm relay: AC220V, 3A, alarm signal isolation output

Communication interface: RS485 232 (optional)

Power supply: AC220V±22V, 50±1Hz; DC24V

Protection level: IP65

Working conditions: Ambient temperature: 0～60℃ Relative humidity: ≤90%

Power-off retention: >10 years

Weight: 0.8kg

Dimensions: 96 (length) × 96 (width) × 110 (depth) mm

Hole size: 92×92 mm

Secondary table installation method: open hole type, wall-mounted type

Electrode installation methods: flow-through, submerged, flanged, pipeline