大兴安岭DDG-2090A Industrial Conductivity Meter

DDG-2090A industrial conductivity

●Overview

   DDG-2090A conductivity meter is simplified on the basis of guaranteed performance, which has a particularly strong price advantage. The clear display, simple operation excellent test performance make it have a high cost performance. It can be widely used for continuous monitoring of conductivity values in solutions such as thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food, tap water.

●Features

● Microcomputerization: Adopt high-performance CPU chip, high-precision AD conversion technology SMT ticketing technology to complete multi-parameter measurement, temperature compensation, automatic conversion of volume, high precision good repeatability

● Reliability: Touch buttons, no switch knob potentiometer

● Alarm function: Alarm signal isolated output, upper lower alarm limits can be set arbitrarily, alarm lag cancel

● Isolated current output: the upper lower limits of the current output corresponding to the conductivity can be set arbitrarily

●Technical parameters

Display mode: LED (digital tube) display, high brightness

Measuring range: (0～20000) μS/cm Temperature: 0～99.9℃

Cell constant: 0.01～20μS/cm (with K=0.01 electrode)

                0.1～200μS/cm (with K=0.1 electrode)

                1.0～2000μS/cm (with K=1.0 electrode)

                10～20000μS/cm (with K=10.0 electrode)

Resolution: 0.001μS/cm; 0.1℃

Electrode constant: 0.001～15.0cm-1 with software setting

Temperature compensation range: automatic 0～99.9℃, manual 0～99.9℃, 25℃ conversion

Accuracy: ±1.0%FS, ±0.3℃

Galvanically isolated output: 4～20 mA (load <750 Ω)

Alarm relay: AC220V, 3A

Communication interface: Isolated RS485 (optional)

Power source: AC220V±22V, 50Hz±1Hz DC24V

Protection level: IP65

Working conditions: Ambient temperature 0～60℃ Relative humidity<90%

Power-off preservation: ﹥10 years; weight, size: 0.8 kg, 96×96×110mm

Hole size: 92×92 mm; installation method of secondary table: hole type

Electrode installation method: flow-through/submersible/flange/pipeline

Standard configuration: one secondary meter one electrode

Ordering guide:

1. The constant of the electrode must be informed

2. The length of the electrode cable is standard at 5m without talking